BLTB 280-5-W-AC15 Wins the 2025 World Demolition Award for Innovation – Tools & Attachments
2025-11-06
Select Region Or Language
-
Region
-
Language
Skid steer loaders are widely used for demolition, road maintenance, landscaping, excavation, utility construction, and material handling. When a project requires breaking concrete, asphalt, rock, or other hard materials, a hydraulic hammer can turn a skid steer into a highly productive breaking machine.
However, not every hydraulic hammer is suitable for every skid steer. The right attachment depends on several technical factors, including the skid steer’s operating weight, auxiliary hydraulic flow, working pressure, attachment system, and the material being broken.
So, what models and specifications are available for skid steer hydraulic hammers?
The answer varies by manufacturer, but skid steer breakers are generally available in light-duty, medium-duty, and heavy-duty configurations. Understanding the differences between these categories can help contractors, equipment dealers, and rental companies select a breaker that delivers reliable performance without overloading the carrier.
In this guide, we recommend several skid steer hydraulic hammer models, the specifications for skid steer loaders.
Light-duty breakers are designed for compact skid steers and applications where maneuverability and attachment weight are important. For light-duty skid steer applications, the BEILITE BLTB-75 provides a compact option for contractors who need a breaker for routine repair and renovation work.
The BLTB-75 has a recommended working flow range of 50–90 L/min, an impact rate of 400–800 BPM, and a 75 mm chisel diameter. Its impact energy is approximately 785 J, providing a practical balance between breaking power and attachment size.
For contractors looking for more breaking capacity while maintaining compatibility with versatile skid steer loaders, the BEILITE BLTB-85 is another option to consider.
The BLTB-85 operates within a 60–100 L/min flow range and delivers approximately 400–800 BPM, with an 85 mm chisel diameter. Its higher impact energy compared with smaller breakers makes it suitable for applications that require more consistent breaking performance.
Typical applications include:
Light concrete breaking
Asphalt repair
Landscaping
Small-scale renovation
Light trenching
Site preparation
A light-duty hydraulic hammer normally features a compact body and relatively low operating weight.
When selecting this category, pay particular attention to:
Recommended carrier weight
Breaker weight
Hydraulic flow
Working pressure
Impact rate
Tool diameter
A typical specification table can be structured as follows:
| Specification | Light-Duty Model |
| Recommended Carrier | Compact / Small Skid Steer |
| Breaker Weight | Manufacturer-specific |
| Oil Flow | Manufacturer-specific |
| Working Pressure | Manufacturer-specific |
| Impact Rate | Manufacturer-specific |
| Tool Diameter | Manufacturer-specific |
| Main Applications | Asphalt, Light Concrete, Landscaping |
The actual specifications should always be confirmed against the manufacturer's current product datasheet.
For general construction and demolition work, the BEILITE BLTB-100 can serve as a representative medium-duty hydraulic breaker.
The BLTB-100 has a working flow range of 80–110 L/min, a working pressure range of approximately 150–170 bar, and an impact rate of 350–700 BPM. It uses a 100 mm chisel and delivers approximately 1,960 J of impact energy.
Typical applications include:
Concrete demolition
Road construction
Asphalt removal
General excavation
Utility work
Medium-duty rock breaking
When evaluating a medium-duty model, buyers should pay particular attention to:
Recommended carrier weight
Hydraulic flow range
Operating pressure
BPM
Breaker weight
Chisel diameter
Impact energy
This category is often a practical choice for contractors who use the same skid steer for multiple types of construction work.
Heavy-duty hydraulic hammers are designed for larger skid steers, especially machines equipped with high-flow auxiliary hydraulic systems. When the job involves thicker concrete, harder materials, or more demanding road and excavation work, the BEILITE BLTB-125 provides a step up in breaker size and impact energy.
The BLTB-125 is designed for a 90–120 L/min working flow range, with a working pressure of approximately 150–170 bar. It operates at 350–650 BPM and uses a 125 mm chisel. Its impact energy is approximately 2,550 J.
They are intended for demanding applications such as:
Heavy concrete demolition
Large rock breaking
Road and infrastructure projects
Foundation demolition
Heavy-duty excavation
Compared with lighter models, heavy-duty breakers generally feature greater impact energy and more robust construction.
Important characteristics can include:
Higher impact energy
Higher hydraulic flow requirements
Heavy-duty housing
Reinforced components
Durable piston and cylinder assemblies
Longer working cycles under demanding conditions
However, heavy-duty does not mean universally better. The breaker must still be correctly matched with the skid steer.
The following table provides a practical starting point for comparing BEILITE hydraulic breaker models for skid steer applications:
| Application | BEILITE Model | Working Flow | Impact Rate | Chisel Diameter | Impact Energy |
| Light-duty breaking | BLTB-75 | 50–90 L/min | 400–800 BPM | 75 mm | 785 J |
| General construction | BLTB-85 | 60–100 L/min | 400–800 BPM | 85 mm | 1,260 J |
| Medium-duty demolition | BLTB-100 | 80–110 L/min | 350–700 BPM | 100 mm | 1,960 J |
| Heavy concrete and road work | BLTB-125 | 90–120 L/min | 350–650 BPM | 125 mm | 2,550 J |
| High-flow heavy-duty work | BLTB-135 | 120–180 L/min | 350–500 BPM | 135 mm | 3600 J |
When comparing different hydraulic hammer categories, buyers can use the following framework:
| Specification | Light Duty | Medium Duty | Heavy Duty |
| Carrier Weight | Compact skid steer | Mid-size skid steer | Large / high-flow skid steer |
| Breaker Weight | Light | Medium | Heavy |
| Oil Flow | Low | Medium | High |
| Working Pressure | Model-specific | Model-specific | Model-specific |
| Impact Rate | Model-specific | Model-specific | Model-specific |
| Impact Energy | Light | Medium | High |
| Tool Diameter | Small | Medium | Large |
| Typical Application | Asphalt / light concrete | Demolition / general construction | Heavy rock / demolition |
This table should be used as a selection framework rather than a universal specification chart. Actual flow, pressure, BPM, weight, and tool diameter depend on the specific breaker model.
Choosing the right breaker is easier when you follow a systematic process.
Start with the exact machine model.
Common skid steer brands include:
Bobcat
Caterpillar
CASE
JCB
John Deere
Kubota
New Holland
However, the brand name alone is not enough.
Different models from the same manufacturer can have significantly different operating weights and auxiliary hydraulic specifications.
Check the skid steer’s:
Operating weight
Rated operating capacity
Auxiliary hydraulic configuration
Then compare these specifications with the hydraulic hammer manufacturer's recommended carrier range.
This helps ensure that the attachment is neither excessively heavy nor too small for the machine.
This is one of the most important steps.
Always compare the skid steer's actual auxiliary hydraulic specifications with the hammer's required flow and pressure range.
Do not assume that two skid steers in the same weight class have identical hydraulic systems.
A machine with a high-flow auxiliary circuit may support a different class of hydraulic hammer than a standard-flow machine.
Before ordering, verify:
Quick coupler
Mounting bracket
Hydraulic hoses
Hose diameter
Connection type
If necessary, the breaker supplier can provide or customize a mounting bracket for the specific carrier.
Your working material should also influence the selection.
| Application | Recommended Hammer Characteristics |
| Asphalt | Appropriate BPM with moderate impact energy |
| Concrete | Balanced impact energy and frequency |
| Hard Rock | Higher impact energy |
| Trenching | Narrow chisel / concentrated impact |
| Demolition | Appropriate impact energy and durable construction |
The best breaker is therefore determined by both machine specifications and job requirements.
One of the most important questions for skid steer owners is whether they need a standard-flow or high-flow hydraulic attachment.
Standard-flow skid steers provide a lower auxiliary hydraulic flow suitable for a broad range of attachments.
A hydraulic hammer designed for standard-flow operation must be selected according to the machine's actual auxiliary flow range.
High-flow skid steers provide substantially greater auxiliary hydraulic flow.
This allows them to operate attachments that require higher hydraulic power, including certain heavy-duty hydraulic hammers.
High-flow systems can be particularly useful for demanding demolition and rock-breaking applications.
Not necessarily.
A hydraulic hammer should only be operated within the manufacturer's specified hydraulic parameters.
If a breaker requires more flow than the skid steer can provide, it may fail to deliver its designed performance.
Conversely, supplying excessive flow without proper control can result in excessive heat and component wear.
Always check the specifications of both the skid steer and hydraulic hammer before installation.
Hydraulic flow influences the operating speed and hydraulic power available to the breaker.
However, breaker performance depends on more than flow alone.
The complete system includes:
Hydraulic Flow + Working Pressure + Piston Design + Valve System + Accumulator + Impact Mechanism
This is why simply selecting the breaker with the highest flow requirement does not guarantee the highest productivity.
A simple starting point is:
Small Skid Steer → Light-Duty Breaker
Medium Skid Steer → Medium-Duty Breaker
Large / High-Flow Skid Steer → Heavy-Duty Breaker
But this is only a starting point.
Carrier weight alone is not enough. Hydraulic flow, pressure, attachment compatibility, impact energy, and application must also be considered.
For example, two skid steers with similar operating weights may require different hydraulic hammers because their auxiliary hydraulic systems have different flow rates.
The same principle applies to two projects using the same machine. Breaking thin asphalt and breaking hard rock may require different working tools and breaker configurations.
A correctly matched hydraulic hammer can expand the versatility of a skid steer across many construction applications.
Hydraulic hammers can break concrete slabs, foundations, walls, and other structures.
For reinforced concrete, the breaker should provide sufficient impact energy and be equipped with an appropriate working tool.
Road maintenance contractors commonly use hydraulic breakers for localized asphalt removal and pavement repair.
A suitable impact frequency can help maintain efficient production while controlling unnecessary vibration.
Rock excavation requires sufficient impact energy to fracture hard material.
For harder rock, contractors may need a heavier breaker and a suitable pointed working tool.
Hydraulic hammers can assist with:
Pavement removal
Concrete road demolition
Roadside excavation
Infrastructure maintenance
Their compact size also makes skid steer-based breaking equipment useful in restricted work areas.
A hydraulic hammer can help contractors break hard layers during trenching operations.
A narrow chisel can concentrate impact energy into a smaller area, helping create or widen trenches in appropriate ground conditions.
For small and medium demolition projects, a skid steer equipped with a hydraulic breaker can provide a compact alternative to larger demolition equipment.
The final choice should consider structural material, thickness, working space, and required production rate.
Price and impact energy are important, but they should not be the only purchasing criteria.
The cylinder and piston are core components of a hydraulic breaker.
High-quality materials, precise machining, and appropriate heat treatment can contribute to consistent performance and service life.
The housing protects internal components and absorbs working loads.
A robust housing is especially important for demanding demolition and rock-breaking applications.
Seals help prevent hydraulic oil leakage and protect internal components from contamination.
A reliable sealing system contributes to stable operation and easier maintenance.
The working tool directly transfers impact energy into the material.
The correct material, heat treatment, hardness, and geometry all influence tool life and breaking performance.
A hydraulic hammer should be designed with routine maintenance in mind.
Accessible components, practical lubrication points, and straightforward inspection procedures can help reduce downtime.
Even a well-designed breaker requires replacement parts over its working life.
When comparing suppliers, check the availability of:
Chisels
Seal kits
Bushings
Accumulators
Hydraulic components
Fasteners
Other wear parts
Reliable spare parts support is particularly important for contractors and rental fleets.
A professional manufacturer should be able to assist with:
Breaker selection
Hydraulic matching
Installation
Troubleshooting
Maintenance
Spare parts
Technical documentation
For B2B buyers, this support can be just as important as the initial purchase price.
At BEILITE, we understand that a hydraulic breaker is part of a complete carrier-attachment system. The right solution must work with the skid steer’s hydraulic circuit, mounting system, and actual working conditions.
Our hydraulic breaker solutions can be evaluated according to:
Carrier compatibility
Breaker operating weight
Hydraulic oil flow
Working pressure
Impact frequency
Impact energy
Tool diameter
Mounting configuration
Application requirements
For contractors and equipment dealers, we can also support different attachment configurations and OEM/ODM requirements.
When selecting a BEILITE hydraulic hammer for a skid steer, providing the exact carrier model and hydraulic specifications allows our technical team to recommend a more appropriate configuration.
The correct size depends on the skid steer’s operating weight, auxiliary hydraulic flow, working pressure, attachment configuration, and application.
Do not select a breaker based on carrier weight alone.
Check the skid steer’s operating weight, hydraulic flow, hydraulic pressure, auxiliary circuit, and attachment interface. Then compare them with the breaker manufacturer's specifications.
The required flow varies by breaker model. Smaller breakers generally require less flow, while larger and high-flow models require more.
Always use the manufacturer's recommended flow range.
Potentially, yes, provided that both skid steers meet the breaker’s hydraulic and carrier requirements and the mounting system is compatible.
The primary difference is the carrier and attachment configuration. Skid steer breakers are designed around skid steer hydraulic systems and attachment interfaces, while excavator breakers are matched to excavator weight classes, hydraulic circuits, and mounting brackets.
A breaker designed for one carrier type should not automatically be assumed to be suitable for another.
Not necessarily.
High-flow breakers can provide greater hydraulic power when paired with an appropriate high-flow skid steer, but the best breaker is the one correctly matched to the machine and application.
Maintenance intervals depend on the breaker model, operating conditions, working hours, lubrication system, and manufacturer recommendations.
Regular inspection and lubrication are essential, particularly in demanding rock and demolition applications.
Price varies according to breaker size, impact energy, hydraulic requirements, construction quality, brand, configuration, and included accessories.
For an accurate quotation, buyers should provide their skid steer model and hydraulic specifications rather than comparing price alone.
Choosing a skid steer hydraulic hammer is ultimately a matching process rather than simply a size selection.
Start with:
Carrier Weight → Hydraulic Flow → Working Pressure → Impact Energy → BPM → Tool Diameter → Mounting Compatibility → Application
A compact skid steer may require a lightweight breaker for asphalt and light concrete, while a larger high-flow machine may be suitable for a heavy-duty breaker used in demanding demolition or rock excavation.
The right hydraulic hammer is not necessarily the largest or most powerful model. It is the model that matches your skid steer's hydraulic system and your actual working conditions.
Send us your skid steer model, operating weight, hydraulic flow, and working pressure. Our BEILITE team can recommend a suitable hydraulic breaker model and configuration for your application.
Contact BEILITE today to find the right skid steer hydraulic hammer for your project.
Phone/ Whatsapp:+86 18357669906
Email:info@beilite.com