BLTB 280-5-W-AC15 Wins the 2025 World Demolition Award for Innovation – Tools & Attachments
2025-11-06
Select Region Or Language
-
Region
-
Language
For Hyundai excavator fleet owners and contractors, equipping machines with the right hydraulic breaker is essential to maximizing job site productivity. While Hyundai excavators (from the compact HX/R-series to heavy mining giants) are renowned for their hydraulic efficiency, fuel economy, and strong breakout force, matching them with an improper hydraulic hammer quickly leads to severe operational bottlenecks.
Equipment owners frequently face critical challenges such as hydraulic mismatches leading to overheating and blown seals, carrier structural fatigue caused by violent recoil vibrations, and costly unplanned downtime from lower-quality breaker failures. Beilite (BLTB) Hydraulic Hammers are specifically engineered with wide hydraulic flow tolerances, high impact energy outputs, anti-blank firing technology, and reinforced housings to eliminate these bottlenecks and integrate seamlessly into your Hyundai fleet.
The table below outlines technical specifications for the entire Beilite BLTB Breaker Series to help you select the exact match for your Hyundai excavator's operating weight, auxiliary hydraulic flow, and working pressure.
| Breaker Model | Silenced Weight (kg) | Chisel Dia. (mm) | Operating Flow (L/min) | Operating Pressure (bar) | Impact Energy (J) | Target Hyundai Excavator Models | Carrier Weight (t) |
| BLTB-40 | 86 | 40 | 15–30 | 90–120 | 130 | HX17AZ, R17Z-9A | 0.5 – 1.2 t |
| BLTB-45 | 137 | 45 | 20–40 | 90–120 | 250 | HX27AZ, R27Z-9 | 0.8 – 1.5 t |
| BLTB-53 | 180 | 53 | 20–50 | 90–120 | 350 | R30Z-9AK, HX35AZ | 1.5 – 3.5 t |
| BLTB-60 | 263 | 60 | 30–60 | 100–130 | 440 | HX40A, HX48AZ | 3.0 – 5.5 t |
| BLTB-70 | 362 | 70 | 40–70 | 110–140 | 540 | HX55ACR, R55-9A, HX60A | 4.5 – 6.0 t |
| BLTE-75 | 466 | 75 | 50–90 | 120–150 | 785 | R60CR-9A, R80CR-9A | 6.0 – 8.5 t |
| BLTB-85 | 666 | 85 | 60–100 | 130–160 | 1,260 | HX85A, HX90A | 7.0 – 11.0 t |
| BLTB100 | 986 | 100 | 80–110 | 150–170 | 1,960 | HX130A LCR, HX140A L | 10.0 – 14.0 t |
| BLTB-125 | 1,357 | 125 | 90–120 | 150–170 | 2,550 | R140LC, HX160A L, HX180A L | 14.0 – 18.0 t |
| BLTB-135 | 1,736 | 135 | 120–180 | 160–180 | 3,600 | HX210A L, R215, R220LC-9S | 18.0 – 22.0 t |
| BLTB-140 | 1,910 | 140 | 120–180 | 160–180 | 3,690 | HX220A L, HX235A LCR | 20.0 – 24.0 t |
| BLTB-150 | 2,318 | 150 | 150–210 | 180–200 | 5,400 | HX260A L, R260LC | 24.0 – 27.0 t |
| BLTB-155 | 2,610 | 155 | 180–240 | 200–220 | 6,172 | HX300A L, R300LC | 27.0 – 33.0 t |
| BLTB-165 | 3,149 | 165 | 200–260 | 210–230 | 8,600 | HX350A L, R380LC-9SH | 33.0 – 38.0 t |
| BLTB175D | 4,575 | 175 | 210–260 | 230–250 | 15,000 | HX380A L, HX400A L | 36.0 – 45.0 t |
| BLTB-185 | 5,180 | 185 | 230–280 | 250–270 | 24,000 | HX480A L, R480LC | 45.0 – 55.0 t |
| BLTB-190 | 5,420 | 195 | 260–310 | 260–280 | 28,000 | HX520A L, R520LC | 50.0 – 60.0 t |
| BLTB-210 | 7,052 | 210 | 340–400 | 280–300 | 36,500 | R800LC | 60.0 – 75.0 t |
| BLTB-220 | 9,601 | 220 | 390–450 | 300–330 | 41,500 | HX800A L | 68.0 – 85.0 t |
| BLTB-245 | 11,980 | 245 | 450–550 | 300–330 | 49,000 | HX1000A L | 90.0 – 130.0 t |
| BLTB-260 | 12,166 | 260 | 490–590 | 300–330 | 56,000 | R1200LC | 90.0 – 160.0 t |
Proper mechanical mounting and hydraulic line connection ensure high demolition efficiency and protect your Hyundai machine's main pump.
Mechanical Mounting: Park the Hyundai excavator on flat ground. Lower the arm to align the stick and link pin holes with the top bracket of the Beilite hammer. Insert the mounting pins and secure them with retaining bolts and cotter pins.
Depressurize and Connect Hoses: Shut off the engine and cycle the pilot joysticks to release residual pressure in the line. Close the stop valves on both sides of the excavator arm, remove blind plugs, and connect the high-pressure supply line (IN) and return line (OUT).
Set Pressure & Flow on Hyundai Monitor: Start the engine and open the Hyundai Cluster Monitor menu. Select One-Way Breaker Mode and configure the auxiliary flow rate (L/min) to match your Beilite breaker’s specific target range.
Air Bleeding & Operational Test: Open the arm stop valves. Run the engine at low idle and actuate the breaker pedal intermittently for 2–3 minutes without contacting rock to purge trapped air from the circuit.
Calibrate Sub-Relief Valves: Always test and adjust your excavator’s auxiliary relief valve setting before initial use. Unregulated pressure spikes blow out internal seals and damage pistons.
Regular Greasing: Apply high-temperature molybdenum disulfide grease to the chisel bushings every 2 hours of continuous operation to prevent premature bushing galling.
Avoid Blank Firing & Prying: Never engage the hammer unless the chisel is firmly pressed against the target surface. Never use the breaker chisel as a lever to pry rocks.
Are you ready to optimize your Hyundai excavator's breaking efficiency with field-tested, heavy-duty hydraulic hammers?
As a leading global Hydraulic Hammer Manufacturer, Beilite (BLTB) provides factory-direct pricing, OEM/ODM solutions, full bracket customization, and rapid global spare parts supply.
Get a Free Custom Quote: Contact our engineering team today to receive a personalized quote tailored to your excavator model and local project conditions.
Email: info@beilite.com
Website: https://www.beilite.com/en/index.html
Global Sales & Technical Support: Contact Beilite Machinery to consult directly with our technical experts!
Phone/ Whatsapp:+86 18357669906
Email:info@beilite.com