Building the Future with Technology: BEILITE Showcases Sound-Suppressed Hydraulic Breaker Solutions at the 2025 China-Africa Economic and Trade Expo.
2025-06-16
How Often Should a Hydraulic Breaker Be Greased?
Time: 2025-07-10 12:58
Share:
Keeping your hydraulic breaker well-maintained isn’t just recommended—it’s essential for performance, durability, and long-term cost savings. One of the most critical yet often overlooked maintenance steps is regular greasing.
We’re going to cover why it’s necessary and how to properly grease your hydraulic hammer. Keep reading to learn more!
Why Greasing a Hydraulic Breaker Matters
Every strike from a hydraulic breaker generates immense force, friction, and heat. Over time, this stress wears down internal components such as the chisel, bushings, and piston—unless properly lubricated.
Grease acts as a protective barrier that:
- Reduces metal-to-metal friction, minimizing wear on critical parts and lowering your repair costs
- Prevents overheating, protecting seals and reducing the chance of internal failure
- Pushes out dust and debris, keeping the tool chamber clean
- Maintains consistent impact energy, ensuring efficient operation and faster job completion
Neglecting lubrication—even for short periods—can cause premature wear, seal failure, and expensive downtime.
How to Grease a Hydraulic Breaker Correctly
Proper greasing isn’t just about frequency—it’s about technique.
Best practices for greasing a hydraulic hammer:
- Position the breaker vertically This allows the tool to rest in the housing with its own weight, ensuring even grease distribution.
- Firmly press the chisel into the breaker This controls the amount of grease entering the tool chamber and prevents over-greasing.
- Grease every 2 hours during operation Frequent lubrication prevents excessive wear. (Tip: Mark this clearly in your jobsite checklists.)
- Watch for visible wear Re-grease whenever the tool looks shiny inside the front head—this indicates existing grease has worn off.
- Use the right grease Always choose the manufacturer-recommended hydraulic hammer grease. Avoid standard EP greases, which can melt and drain, failing to protect the internal parts effectively.
Maintenance Tips to Extend the Life of Your Breaker
- Start with a Visual Inspection
Before every shift, take a minute for a visual check. Look for signs of wear, discoloration, or leaks. Areas around the tool and bushings should be dry and properly seated.
- Inspect the Chisel Bushing
Insert the chisel and test for rotation. If it rotates freely, the bushing is likely worn and should be replaced immediately to prevent piston damage.
- Check Hydraulic Hoses
Verify the hose length is appropriate. Hoses that are too long can catch on rebar or debris, while short hoses may restrict motion or cause strain at the fittings.
Routine inspections can prevent costly failures, keep your equipment running efficiently, and help avoid unplanned downtime.
Choose Beilite for Maintenance Support
At Beilite, we go beyond building powerful hydraulic breakers—we help you maintain them for long-term performance.
Whether you’re looking for:
- The right grease and chisels
- Training on best greasing practices
- Or automated lubrication systems for your fleet
Our team is here to support you every step of the way.
Need Help? Talk to Our Experts
Unsure which grease to use or how often to apply it for your site conditions? 👉 Contact Beilite’s maintenance support team today. We’ll help you keep your hydraulic breaker in top condition—no matter where you work.
FAQs
Q: Can I use multi-purpose grease?
A: No. Always use chisel paste formulated for high-impact tools. Multi-purpose grease lacks the necessary temperature and pressure resistance.
Q: How do I know if I’ve applied enough grease?
A: Watch for clean grease purging from the bushing areas. That’s your sign to stop.
Q: Will auto-greasing completely replace manual checks?
A: Not entirely. It helps, but you should still inspect tool wear and grease output daily.
Phone:
Email: